Colors (Click swatch to select color. Use icons below each swatch to zoom or order a sample.)

Creek 7103
Espresso 7105
Footbridge 7102
Natural 7106
Thistle 7104
Bali #BE-003098

Bali Buckskin 2 inch Vinyl Horizontal Blind

Bali Buckskin 2 inch Vinyl blinds are room darkening and coordinate with the Bali vertical blind collection. Buckskin has two-toned smooth slats in (5) colors with a neutral color to the street side to create a uniform look from the exterior. The SureTight low profile steel headrail provides superior lightblock with a lip between the headrail and top slat. These blinds come with color coordinated components and durable easy to clean vinyl slats that are flame retardant. Due to weight limitations, blinds 84" wide and greater must be made as two blinds on one headrail. This is practical for larger windows and sliding patio doors

$99.75 Based upon size 24" x 36"
1. Specify your measurements
2. Customize your options
3. Review Your Selections
Color Selection: None Selected
Width: 24"
Height: 36"
Cord Controls (blinds less than 12" wide must be center tilt only): -
Hold Down Brackets: -
Label Blind By Room: -
Mounting Options: -
Multiple Blinds On One Headrail (widths 84" & greater must have this option): -
Shims & Projection Brackets: -
Valance Options: -
Total Cost:
$99.75

Bali logo
Blindsexpress Logo

2" Vinyl Blind Specification Guide

2" Vinyl Blind Installation Instructions

 
2inch vinyl pic
   
Bali Vinyl Horizontal Blinds. A classic window treatment with an assortment of up-to-date colors, textures and patterns to suit any decor.
   
   
2 inch vinyl privacy
   
 
   
   
   
   
   

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Vinyl Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.



Installation instruction-Details

Do you charge for shipping?

Shipping fees are included in most products online. The exceptions are Norm Brand and freight sizes. Shipping fees will be seen prior to completing your order in the shopping cart. There may be freight exceptions depending on the quantity of freight items on the order. All vendors have different freight policies. You may receive an email or phone call in the unusual circumstance where additional charges apply.

Hawaii and Alaska Deliveries: Surcharges are online and will apply to your order for most products shipping to Alaska or Hawaii. There are some cases with larger orders where you may get a call from us with additional charges for orders shipping here.

Feel free to call us with any shipping questions. Customer service 1-800-836-4488 or email us: info@blindsexpress.com

How long does shipping take?

Most custom products take approximately 2-3 weeks from ordering to delivery. Our Quick Ship brand products usually ship within 5-7 business days depending on the current supply and demand of the product. Woven Wood/Natural Shade products run 3-4 weeks for delivery as there are natural materials used to make these shades. The North American Shutter collection is on a 4-5 week timeframe for delivery. ALL other standard Shutter collections are taking 8-10 weeks for delivery.

Exceptions:

Freight items over 80 inches will take a few days longer to arrive as they ship by freight handlers. There are always exceptions if there are material shortages, production delays or during holidays. We do try and note material shortages on the product info pages if vendors notify us ahead of time. 

When in doubt, please call or email BEFORE ordering custom product. We would be happy to check current ship times. 1-800-836-4488 or info@blindsexpress.com

Customer Reviews

No reviews yet for this product. Be the first to leave a review!

People who bought this also bought