Bali Classic Roman Shades in the Castleweave collection have a light filtering material made of 100% polyester. This fabric has moderate privacy which allows light to gently filter through the material and may cause images and shapes to be seen but details are not visible. Shades and valances are one continuous piece of fabric that provides a unified finished look. There is an applied backing that is neutral to the street side. Fabric appearance can vary based on the lighting and time of day, as well as when the shade is partially or fully lowered. Colors may vary between dye lots. It is recommended to order the shades for the same room at the same time. Oeko-Tex Stanard 100 certifies that their fabrics are free of PVC, halogen, lead, formaldehyde, allergenic dyes, pesticides, phenols and heavy metals and also meet all VOC content limits.
Fabric Roman shades are available in Flat or Looped (Tear Drop Style) styles. Looped is an additional surcharge.
 |
|
| Bali Roman Shade Specifications - Motorization Specs | |
 Roman ShadesExclusive style from on-trend to timeless Bali Roman Shades give you access to all the fabrics, colors and patterns preferred by professional designers.
|
|
Types of Roman Shades |
|
 Custom Looped Roman ShadesLooped Roman Shades feature handcrafted folds that cascade down the face of your shade to create eye-catching depth |
|
 Custom Flat Roman ShadesFlat Roman Shades feature a handcrafted pleated design that adds dimension to your window covering |
|
|
|
|
|
|
|
| Lift Systems | |
|
|
|
|
|
|
 The Continuous Cord Loop provides easy operation of larger heavier shades. A powerful clutch lifts the shade and holds it steady without the cord loop changing length. The included cord loop guide provides tension and must be installed for the shade to operate. This device also keeps the cord out of reach of children and/or pets to eliminate dangling cord hazards. |
|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance
Inside Mount Width
- Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom)
- Take the smallest of the three measurements to the nearest 1/8 of an inch
- The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation
Inside Mount Height
- Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window
- Take the largest of the three measurements.
Outside Mount Width
- Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR however wide you want the finished product to be
- Be sure to measure wide enough to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surfaces. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim
- French doors should have a minimum of 1 inch past the glass on each side for proper light coverage
Outside Mount Height
- Measure from the top to bottom edge of the window frame/trim. If no trim, be sure you provide the height you want the finished product to be from the top of the headrail to the bottom of the bottom rail
- Be sure to allot for coverage for proper light control and mounting hardware. If mounting above the window opening to the wall surface, you will need 2 inches of surface area.
- French doors should have a minimum of 2 inches above the glass on the surface of the door for installation brackets and 2 inches below for hold down brackets
Shipping fees are included in most products online. The exceptions are Norm Brand and freight sizes. Shipping fees will be seen prior to completing your order in the shopping cart. There may be freight exceptions depending on the quantity of freight items on the order. All vendors have different freight policies. You may receive an email or phone call in the unusual circumstance where additional charges apply.
Hawaii and Alaska Deliveries: Surcharges are online and will apply to your order for most products shipping to Alaska or Hawaii. There are some cases with larger orders where you may get a call from us with additional charges for orders shipping here.
Feel free to call us with any shipping questions. Customer service 1-800-836-4488 or email us: info@blindsexpress.com
Most custom products take approximately 2-3 weeks from ordering to delivery. Our Quick Ship brand products usually ship within 5-7 business days depending on the current supply and demand of the product. Woven Wood/Natural Shade products run 3-4 weeks for delivery as there are natural materials used to make these shades. The North American Shutter collection is on a 4-5 week timeframe for delivery. ALL other standard Shutter collections are taking 8-10 weeks for delivery.
Exceptions:
Freight items over 80 inches will take a few days longer to arrive as they ship by freight handlers. There are always exceptions if there are material shortages, production delays or during holidays. We do try and note material shortages on the product info pages if vendors notify us ahead of time.
When in doubt, please call or email BEFORE ordering custom product. We would be happy to check current ship times. 1-800-836-4488 or info@blindsexpress.com
No reviews yet for this product. Be the first to leave a review!
