Bali's Exterior Solar Roller shades make it easy to enjoy the benefits of solar shades year-round. Ideal for porches, patios and decks. They are installed to the exterior of your window or patio to filter and diffuse light while maintaining the outdoor view, manage temperature control and block damaging UV rays. The lighter the fabric color, the better the temperature control. Fabrics and components are specifically designed for outdoor use. Cassette valances are powder coated and protect shades from exterior elements. The installation brackets are also coated for outdoor use. These shades can be cleaned with a mild detergent, with soft brushing and thorough rinsing, do not completely immerse the product. Shade must be completely dried before raising. Please note, these shades must be fully raised during inclement weather and windy conditions.
woven vinyl-poly mix 10% openness factor.
Special Caution!!!!
Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself.
1. Measure the exact width to be covered. Be sure the measurement overlaps the window opening by at least 1 1/2" on each side (3" total overlap) to ensure light control and privacy.
* For Solar Shades make sure the measurement overlaps the window opening by at least 3" on each side (6" total overlap) to ensure light control and privacy.
Exterior Solar Roller Shades
Bali Exterior Solar Shades turn your indoor and outdoor spaces alike into sun-shaded sanctuaries. Able to block sunlight before it enters your home, outdoor solar shades for windows control temperatures even better than their interior counterparts. Combined with UV protection and glare management your home stays protected in more ways than one. Best of all, outdoor solar shades filter light while preserving your view so you can enjoy the scenery all day long.
Whether they’re installed on the outside of your home’s windows, on your porch or other outdoor structure external solar shades offer amazing benefits:
Complete Spec Guide Click Here
 The standard continuous cord loop provides easy operation of window treatments. A powerful clutch lifts the shade and holds it steady without the cord loop changing length. Included safety tension device keeps the cord out of reach of children and pets and eliminate dangling cord hazards. |
 Choose how your fabric will roll over the tube. Standard orientation (off the back) provides optimal light control, while reverse roll (off the front) will project the fabric away from the window to make room for obstructions like window handles or cranks. Reverse roll is not available with cassette valance. |
 Add a cassette valance to your window treatment to create a unique visual effect. Available in two sizes on continuous cord loop shades. Available in white, vanilla and brown. Cassettes have a powder coated finish and are rated for outdoor use. Cassette valances must be ordered at the same time as the shade. If ordering shades for multiple window sizes, please be sure to specify valance size on order to ensure all are manufactured with same size valance. |
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Roller Shades
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will make the correct deduction from the total width to allow for brackets and correct installation. Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally- 1 1/8" or more from ordered width on inside mount .
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Shipping fees are included in most products online. The exceptions are Norm Brand and freight sizes. Shipping fees will be seen prior to completing your order in the shopping cart. There may be freight exceptions depending on the quantity of freight items on the order. All vendors have different freight policies. You may receive an email or phone call in the unusual circumstance where additional charges apply.
Hawaii and Alaska Deliveries: Surcharges are online and will apply to your order for most products shipping to Alaska or Hawaii. There are some cases with larger orders where you may get a call from us with additional charges for orders shipping here.
Feel free to call us with any shipping questions. Customer service 1-800-836-4488 or email us: info@blindsexpress.com
Most custom products take approximately 2-3 weeks from ordering to delivery. Our Quick Ship brand products usually ship within 5-7 business days depending on the current supply and demand of the product. Woven Wood/Natural Shade products run 3-4 weeks for delivery as there are natural materials used to make these shades. The North American Shutter collection is on a 4-5 week timeframe for delivery. ALL other standard Shutter collections are taking 8-10 weeks for delivery.
Exceptions:
Freight items over 80 inches will take a few days longer to arrive as they ship by freight handlers. There are always exceptions if there are material shortages, production delays or during holidays. We do try and note material shortages on the product info pages if vendors notify us ahead of time.
When in doubt, please call or email BEFORE ordering custom product. We would be happy to check current ship times. 1-800-836-4488 or info@blindsexpress.com
No reviews yet for this product. Be the first to leave a review!
