Our Brand Roman Shade Rio Soft Fold collection is a linen fabric made of 100% polyester.
Soft Fold Romans are the classic roman shade style with 6 inch pockets of soft cascading fabric when pulled down. Since more fabric is needed to make this style of roman, they do have a larger stack (height and depth) when pulled up. Please note, the billowing pockets do interrupt a textured or patterned fabric.
*The roman shade pictures shown on our website for each product shows styles only not the actual colors available
Our Brand Roman Shades |
|
**NEW CORDLESS HEADRAIL AND DESIGN STARTING 4/20/2026- NEW SLOTTED WOODEN HEADRAIL WITH NEW INSTALLATION. NO MORE SNAP ON RODS BEHIND SHADES** Roman Shades come in Classic Pleat, Flat Fold and Hobbled Fold CLASSIC PLEAT |
 |
| FLAT FOLD |
 |
| SOFT FOLD |
 |
Cordless option is Available |
 |
OtherControl Options |
  |
Liners Are Available |
 |
Stacking Charts |
 |
Check Here Before Ordering Click here for Our Brand Roman Shades Specifications
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Roman Shades
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
• French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
Standard Cord Installation Instructions
Shipping fees are included in most products online. The exceptions are Norm Brand and freight sizes. Shipping fees will be seen prior to completing your order in the shopping cart. There may be freight exceptions depending on the quantity of freight items on the order. All vendors have different freight policies. You may receive an email or phone call in the unusual circumstance where additional charges apply.
Hawaii and Alaska Deliveries: Surcharges are online and will apply to your order for most products shipping to Alaska or Hawaii. There are some cases with larger orders where you may get a call from us with additional charges for orders shipping here.
Feel free to call us with any shipping questions. Customer service 1-800-836-4488 or email us: info@blindsexpress.com
Most custom products take approximately 2-3 weeks from ordering to delivery. Our Quick Ship brand products usually ship within 5-7 business days depending on the current supply and demand of the product. Woven Wood/Natural Shade products run 3-4 weeks for delivery as there are natural materials used to make these shades. The North American Shutter collection is on a 4-5 week timeframe for delivery. ALL other standard Shutter collections are taking 8-10 weeks for delivery.
Exceptions:
Freight items over 80 inches will take a few days longer to arrive as they ship by freight handlers. There are always exceptions if there are material shortages, production delays or during holidays. We do try and note material shortages on the product info pages if vendors notify us ahead of time.
When in doubt, please call or email BEFORE ordering custom product. We would be happy to check current ship times. 1-800-836-4488 or info@blindsexpress.com
No reviews yet for this product. Be the first to leave a review!
